How to deal with Pet Film so it doesn’t get damp

How to deal with Pet Film so it doesn’t get damp

Digital printing has now developed a lot, in the past more digital printing users used DTG printers or Direct To Garment, but after the development of technology now more are using DTF printers or Digital Transfer Film. In this digital printing technique it is believed to have very good quality, even when compared to the DTG Print method, DTF Print is superior in terms of quality because the print resistance on the t-shirt material is stronger such as plastisol printing.

In general, more DTF Printer users use Pet Film as a tool for DTF printing. Pet Film is used to print images, and it is this Pet Film that holds the ink so that DTF Ink can be transferred or transferred to the t-shirt material. There are several things that need to be considered when we buy pet film in roll form.

If the quantity of our orders is large, the Pet Film Roll runs out quickly, but what if we have already bought Pet Film Roll to Roll but our orders are small, there is maintenance so that the Pet Film Roll is not damaged and the print results on the Pet Film are better and perfect.

Try you, pay attention to some of the ways to deal with Pet Film so that it doesn’t get damp below.

1. Don’t buy cheap pet film.

You might look for cheap raw materials to get bigger profits, but keep in mind that raw materials such as cheap Pet Film Roll will actually make the printout not accommodate ink perfectly. Sometimes the first time you print the results are good, but if it is more than 20 meters you will see the inconsistent quality of the Pet Film Roll, the results will be worse.

2. Room temperature.

The main function of the DTG Printer is to print images on the Pet Film, now if the room temperature is hot, the Pet Film will turn yellow or humidity may occur on the Pet Film, therefore keep the room temperature cool so that the Pet Film is kept from getting damp. If you have a more budget, it’s a good idea to install an air conditioner so that the room temperature is cold and the Pet Film is protected from moisture. It is certain that the Pet Film Roll will continue to be maintained and remain dry and not damp.

3. Wrapped after use.

Pet film is usually placed on the back of the DTF printer and entered into the DTF printer, now if you have already printed the Pet Film Roll it is better if the Pet Roll is wrapped back neatly and try to keep the wrapped Pet Film Roll from being exposed to air which resulted in dampness of the Pet Film Roll.

4. Put in a box.

If you using Pet Film Roll usually have a bit of trouble when putting the Pet Film on, it’s a good idea to make a box for the Pet Film Roll so that the Pet Film is also kept moist so it can avoid moisture. You can also make their own boxes for pet film using rollers. The rollers can use roller shafts that are attached to pillow bearings on the left and right. So in that box you can put the Pet Film Roll in the Roller Shaft.

5. Don’t hold hands often.

On the Pet Film there are 2 sides, 1 side as the image print area and 1 side as the Pet layer, so don’t be too frequent or don’t hold the side of the print area with your hand or palm because it will cause the Pet Film to become moist, it’s good when holding the Pet Film Roll use rubber gloves so that the sweat on our hands does not damage the Pet film.

6. After printing, don’t add powder immediately.

Sometimes if our work is piling up, we want our work to be done quickly, but we need to pay attention when it’s done. Don’t sprinkle powder directly on the DTF print because the edges of the image that has just been printed are a bit wet or damp so when the new Pet Film is When printed, sprinkled with powder, automatically the edges of the image will stick to the powder, as a result, the image on the T-shirt on the edges of the image becomes less solid or looks speckled with powder.

Once again, if you want to buy Rolled pet film, try it at a seller’s place that has seen the quality of the sales and is accompanied by testimonials from the buyers. You, you can buy premium quality so that the results are also premium and not cheap.

If you already understand the discussion above, you can practice it at home or in a workshop, you. If this routine continues to be carried out, the Pet Film will avoid dampness. Keep trying and good luck.