Difference between Acrorip 9.0.3 and Acrorip 10.5.3

Difference between Acrorip 9.0.3 and Acrorip 10.5.3

Basically all printers need a driver or software to run the print command. It’s the same if we want to run a t-shirt print command on a DTG printer or DTF printer, we must use this to print individual t-shirts.

For pictures, there is already its own software when you want to set or adjust it so that the picture is bright and clear. For the t-shirt printing program that uses the name Acrorip, Acrorip is in charge of managing the ink that will come out of the printheads of DTG and DTF printers. Any media that will be printed using Acrorip, of course, must adjust the ink percentage so that the resulting image on the t-shirt is neither too thick nor too thin.

Get to know Acrorip 9.0.3 which is used in DTG DTF t-shirt printing.

In Acrorip 9.0.3 there is a feature called one phase or 1 way to print t-shirts. In the past, users usually used DTG prints with 2 runs or 2 prints. Now most people use one phase because it’s faster and more precise. Why used to print DTG T-shirts using 2 phases because the procedure carried out had to print a white print first after that the Tray was pushed back and then it was printed again with color ink, now this is very long because you have to wait for the white print process first.

Some of the views above are Printer Ports that can be used on Acrorip 9.0.3, you can check one by one which printers can be used on Acrorip 9.0.3. For Port 1390/1400 it is used for the Epson 1390 Stylus Photo Printer but this port can also be used for the Epson L1800, now for you who can modify an Epson 1390 Printer to become a DTF Printer, you can use this software.

One of the obstacles to using Acrorip is that when you install it on each computer, there are a number of things that need to be set first so that the Acrorip Crack software can be installed properly. Because the Acrorip 9.0.3 software is cracked and not original, it is necessary to deactivate the antivirus first so that the installed Acrorip is not detected by the virus.

Get to know Acrorip 10.5.2 which is used in DTG DTF t-shirt printing.

Whatever the activity of printing t-shirts, both on DTG Printers and DTF Printers, we still use Acrorip Software, you can use Acrorip 9.0.3, you can also use Acrorip 10.5.2. It should be noted that Acrorip 10.5.2 is also the cracked version, not the original version. If you want to buy the original Acrorip 10.5.2 you can, usually the price is around 5 million with the Acrorip 10.5.2 dongle original software version.

The modified DTF A3 printer that uses Acrorip 10.5.2 is also used in the same way if using Acrorip 9.0.3, but there are several differences in the features of the Acrorip 10.5.2 software, one of which is when setting the color.

The settings above are the settings when selecting the color channel to be used for each printer model, be it a DTG printer or a DTF printer. Just click setup on the Ink Chanel and then sort the colors according to the printhead you are using, for example if you are using an L1800 printhead or a 1390 printhead, it means that the color sequence is Y K W W M C. After adjusting the settings, click save then click OK, then select the YKWWMC ink chanel according to the settings. in the set earlier.

One of the advantages of Acrorip 10.5.2 is that the channel can be changed, for example the yellow clogged can be changed to the white channel and vice versa. For this method, it can be used on Epson L1800 series printers and older printers with the Epson 1390 series. If you want to use this printer for 4 colors, you can just set the color channel.

The White setting in Acrorip 10.5.2 is different from Acrorip 9.0.3

The White setting in Acrorip 10.5.2 is slightly different compared to the white setting in Acrorip 9.0.3, you, see the image below.

On the White tab, you can see “gradient white under any colored pixel”, this setting is usually used if the user wants to use white ink with a low setting, but this setting cannot be used on t-shirt printing for black or colored t-shirts because later the ink will be white not 100% concentrated. This setting is used when you want to print white t-shirts based on white ink that is not too dark or 100% solid. So you have to be really careful when using this feature so you don’t choose this feature wrong, because if you want to print a white t-shirt, choose “100% white under any colored pixels”, then the basis will be 100% solid and it will waste Discard white ink, it’s a good idea to print individual t-shirts on black t-shirts, you, you can use “100% white under any colored pixels”.

And also in the white layer settings when you choose “gradient white under any colored pixel” in the White ink curved (Gradient White) option, you can adjust the percentage of white, if it is not thick enough, you can swipe left to make it even darker, and vice versa. In this facility in Acrorip 9.0.3 there is no setting like this so this is one of the advantages of Acrorip version 10.5.2. if you need Acrorip Software 10.5.2 you can click HERE to get it, good luck.